1. Select the client you wish to run a Pentest on.
2. Once selected click "Run Pentest".
3. Select the type of Pentest you wish to run.
4. After that, click the "Pentest Name" field and Type the name of the Pentest.
5. Next up, click the "Include" field and enter all the IP addresses you want to have tested.
6. If you would like to add a preconfigured private IP space, select one of the options below.
7. Click the "Exclude" field and enter all of the IP addresses you want to exclude from the test. If you want all IP address to be tested you can leave this field blank.
8. Sxipher offers reports to be sent by email. If you wish to opt out of this feature you can select the button to the right of the field.
9. Click on "Next".
10. Next, click on "Add Minimum Runtime".
11. From here you can change the starting date.
12. And you can change the starting time.
13. When finished, click on save
14. Click on "Add Maximum Runtime".
15. From here you can change the prefered end date.
16. And the prefered end time.
17. Afterwards, click on "Save".
18. To have your Pentest run continuously without a minimum or maximum length, simply tick the "Continuous Runtime" box below.
19. Click on "Select".
20. From here you can choose what time of day the pentest should run.
21. To have Genesis Pentest your network 24/7, select the "All Day" box below.
22. Click on "Save".
23. Click on "Next".
24. Once you've reviewed all portions of the Pentest scope, select the disclaimer box down below.
25. Click on "Run Pentest".
26. Select "Copy" to copy the attack bridge curl script. Paste this script into an Ubuntu VM or PC that has been configured to install the Attack-Bridge.
Did this answer your question?Thanks for the feedbackThere was a problem submitting your feedback. Please try again later.
